For starters, in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part # CE29505 on your boat trailer you will also need to use the CE Smith Panel Bracket for 12" Boat Trailer Rollers part # CE10305G and the Roller Shaft with Pal Nuts for Boat Trailer Rollers part # CE10727A.
In regards to installation, these will need to be installed towards the stern of the boat, in the center of the trailer. This would be the only place that would allow them to effectively center... view full answer...
Yes, I can help you find parts for your Spartan SB140 boat trailer. I will start with the winch. The 2-Speed Boat Trailer Winch with 20' Strap and Brake - 3,200 lbs, part # 315-W3200D, is a 2-speed manual winch. It can winch up to 3,200 lbs. It will attach directly to the winch stand.
The CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide, part # CE31013G, is a perfect addition to mount your winch to on your boat trailer. It will mount onto your boat trailers 2" tongue.
Once... view full answer...
Yes, I would recommend you get Boat Trailer Standard Roller Bunk, part # DL21754, for hauling your boat that weighs 235 lbs in your flatbed trailer. These are sold in 4 foot sections and should work well for you once installed.
You may be interested in Boat Trailer Roller Bunk Bracket # DL21762 for when you install the roller bunks in your trailer. view full answer...
Most keel rollers for boat trailers like the CE Smith Keel Roller for Boat Trailers part # CE29519 or CE Smith Keel Roller for Boat Trailers - Self Centering part # CE29505 don't have listed weight capacities as they aren't supporting the full weight of the boat. I recommend simply sticking with the original size and location as intended by the boat trailer manufacturer.
In regards to a comparison, the self-centering model helps re-align the boat on the trailer when you aren't completely... view full answer...
In regards to the CE Smith Post-Style Guide-Ons for Boat Trailers part # CE27620, the length of the boat would not be an issue. In order to confirm compatibility you'll need to verify the frame rails don't exceed 3" wide x 4-1/4" tall and that the adjustable width of 13" from each end of the trailer will work with your boat.
Please note, we also offer the CE Smith Bunk Style Guide-Ons for Pontoon Boat Trailers part # CE27671 which are specifically for pontoon boats. view full answer...
Boat Trailer Roller Bunks, like the item you selected, part # DL21741, are not designed to line-up or center the boat, but for the boat to rest and roll on the bunks. Typically, if you are loading a boat the boat is not loading squarely it is because the trailer is too deep in the water. You would want to use part of the trailer as a reference to determine how far to back the trailer into the water.
You would want to install the bunks in place of your existing bunks or rollers. If you... view full answer...
The CE Smith Boat Trailer part # CE48810 would actually be perfect for your Sun Dolphin Sportsman Boat. This trailer can handle boats on up to 12' long. The bunk boards are 5' long therforfore would provide plenty of support for your boat which is around 8-1/2' long. The trailer comes with everything you need to hit the road and it is offered at a very affordable price. They are actually quite popular for these types of boats which you can see in the attached photo.
I have attached a... view full answer...
The guide-ons you choose for your boat and trailer really depends on the height of your boat.
For a low-profile boat like a fishing boat or a Jon boat I recommend using the 40-inch tall guides, part # CE27620. If you have a taller boat like a cabin cruiser or a deep V hull boat I recommend the 60-in guides, part # CE27640. view full answer...
The Yates Bow Roller for Boat Trailers part # YR300BLK is constructed of a black thermal-plasticized rubber which does have the potential to leave marks on the underside of your boat. For an option that will not leave marks on the underside of your boat, I recommend using the Yates Bow Roller for Boat Trailers part # YR300B or part # YR300Y which are made with a blue thermal-plasticized rubber and yellow thermal-plasticized rubber respectively that are non-marking which means they won't... view full answer...
Switching from roller bunks to bunk boards on your boat trailer is fairly straightforward. For the most part, you will just be replacing the rollers with the boards. We have the following bunk boards available:
-CE Smith Carpeted Bunk Boards for Boat Trailers - 3' Long # CE27800
-CE Smith Carpeted Bunk Boards for Boat Trailers - 4' Long # CE27810
-CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long # CE27820
-CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long # CE27840
-CE... view full answer...
Because of the length of your boat I would recommend the Dutton-Lainson StrongArm Electric Winch, part # DL25200. This DC-powered winch is designed for boats up to 4,000 lbs and includes a wiring harness for easy installation. I am including a link to the installation instructions on the winch.
The Master Lock Electric Trailer Winch, part # 2953AT, you have referenced, has a maximum boat weight capacity of 5,000 lbs , but only a maximum boat length of 18 feet. I would not recommend this... view full answer...
I have a few options to help with loading the boat on the trailer but the best would have to be the CE Smith Keel Roller for Boat Trailers part # CE29505. In order to mount them you'd need the Roller Shaft with Pal Nuts part # CE10727A and CE Smith Panel Bracket part # CE10305G. I would stick with the same type of roller for the front and rear of the boat trailer. view full answer...
We do indeed sell a trailer that would work well for your Sundolphin Pro 102 fishing boat. The CE Smith Boat Trailer, part # CE48810 works for small boats and PWC's up to 12 feet long weighing up to 800 lbs. Since your boat is 10 foot 2 inches long and weighs about 250 lbs, your boat will work with the CE Smith trailer perfectly.
Assembly is required, and all necessary parts and hardware are included. All the licensing and registering paperwork is also included so you can easily get the... view full answer...
The roller I recommend for a flat hull boat is the Yates Side Guide Roller for Boat Trailers part # YR12243-4P which measures 12" long and can be used with the Roller Shaft with Pal Nuts for Boat Trailer Rollers part # CE10705A. We also have the CE Smith Universal-Fit Split Panel Brackets part # CE10500G. view full answer...
The closest part we carry is the CE Smith Steel Step for Trailer Fender, part # CE19012. However, since you mentioned your boat is brand new, chances are you want the exact replacement.
I recommend reaching out to the trailer manufacturer or whoever you purchased the boat/trailer from to source the direct replacement. Parts like the aluminum fender or gusset step are considered part of the trailer body/frame and are very specific to the particular trailer, which is why we do not carry them. view full answer...
I looked up pictures of your Saturn inflatable 12ft. boat and the motor can fold up and out of the way so you should be able to keep it on the boat in terms of ground clearance if loaded on the CE Smith Boat Trailer part # CE48810.
Unless Saturn states that the motor has to come off when on a trailer you would be totally fine to leave it on. view full answer...
The CE Smith Boat Trailer part # CE48810 comes with guide ons which help to center your boat during loading and to hold the boat during transport so I don't really recommend adding anything additional in regards to this aspect because of the size of the boat. However, if you will be launching your boat at night or in the early mornings I recommend using the CE Smith Post-Style Guide-Ons with LED Lights part # CE27740 which will provide visual targets.
What I do recommend using is a two... view full answer...
Yes, the Dexter Nev-R-Adjust Electric Trailer Brake Assembly Kit part # 23-468-469 can be used on a boat trailer. In fact, most boat trailers now come from the factory with electric brakes as they are much more cost effective. I assume your trailer does not already have electric brakes so that means you are also going to need the Dexter Trailer Hub and Drum Assembly part # 845476UC3, the Trailer Wiring 7-Way Upgrade Kit part # HS381-9000, and the Hopkins Engager Push-To-Test Trailer Breakaway... view full answer...
You can simply mount the Boat Trailer Deluxe Roller Bunk, part # DL21740, by just screwing or bolting it in. The mounting brackets, Boat Trailer Roller Bunk Bracket, part # DL21742, are optional in mounting part # DL21740, and are not required.
If you remove your old bunks and installed part # DL21740, the brackets would be needed to attach to the bottom of the bunk where the holes are and there would be no drilling required. This way the bunks would be adjustable to change the height.
If... view full answer...
We can help you with roller guide-ons for your trailer that carries your drift boat, or dory as they are sometimes known. The linked page will show you all such items we offer.
I suggest you take a look at the CE Smith Roller-Style Guide-Ons for Boat Trailers, part # CE27610, and also Fulton part # FBGR200101. The CE Smith rollers would be my preference between the two because they will be gentler on the hull.
If you want to add roller bunks to your trailer to make it easier to load the... view full answer...
Go To Results